Setting a new standard in rocketry
|
Setting a new standard in rocketry |
February 9th, 2008 - Polecat Aerospace has been acquired by Mr. Jack Garibaldi of Stockton, CA. Jack will be continuing production of all Polecat kits, and will be introducing new kits shortly. March 9th, 2007 -
Development is almost complete of the newest Polecat kit, a 7.5" Patriot
Missile (1/2 scale). The kit comes with a 75mm motor mount and dual deploy. The
fins and rings are all CNC Routed, and the fin slotting is laser cut for you.
Designed with L3 certification in mind, this rocket is very stable, easy to
build, can be flown with single or dual deploy, and will fly on J through M
impulse. March 8th, 2007 - Development of
the 4" and 5.5" Jayhawk kits is complete. Both kits are in production
with a release date of March 15th, 2007. View the
rockets here.
February 26, 2007 - Polecat Aerospace has completed upgrading all kits to Laser Cut / CNC Routed components. Additionally, all fin slots are now Laser Cut. All kit upgrades are done without increasing any prices. August 27, 2006 - Polecat Aerospace now includes high
quality vinyl decals with the 4" Nike Smoke, 5.5" Nike Smoke, 4" Army Hawk, and
7.5" Army Hawk kits. These great decals provide the finishing touch to your
scale bird. August 26, 2006 - New kits released May 16, 2006 - New kit tested and going into production. The Raven, a 3" diameter airframe with our 7:1 conical nose cone and very sleek fins was tested at Lucerne Valley and Fiesta Island over the past weekend. The rocket performed very well and held up without any problems. It was tested on a RCS G80-4, CTI G79 (-5 delay), RCS I218-M, and and RCS J350-L. All flights were straight and recovered without incident. The kit is in production now and will be released at Dairy Aire this weekend.
May 11, 2006 - Polecat Aerospace releases three new kits. 1/13 scale of the Mercury Redstone, 54mm mount, dual
deploy
|
|
Copyright © 2003 Polecat Aerospace
|
